Показать сообщение отдельно
Старый 22.03.2012, 11:43   Сообщение #102
roper
Новичок
 
Регистрация: 27.05.2010
Адрес: Москва
Авто: 1,6АКПП, экспр.
Сообщений: 16
Сказал(а) спасибо: 2
Поблагодарили 0 раз(а) в 0 сообщениях
По умолчанию

Доброго всем дня! Предлагаю ознакомиться со следующим экземпляром:

How the BLIS working?


The laser eradiate sensor fixed below the side mirror by appropriate angel, eradiate laser at the frequency of more than 200 000 times/seconds, when another car enter the detecting area, ( About 13M from the mirror to the behind obstacle), the small alarm light beside A pillar will shining or alarming few times, to remind drivers careful change road. And the effect will not effect by weather or time.

Car Blind Spot Detection System Parameter:

Average Power: 15W average power
Input Voltage (Vin): 9~16V
Rated voltage (V nom): 12V
Rated current (I nom): 0.1A
Maximum current (I max): 7.5A
working temperature: -40°C~+105°C
Working distance: 0~15m
Install model: install horizontally below the side mirror
Install angle: 28~31 with the vehicle ordinate axis centerline

Это уже реально серьезная штука, себе такую присматриваю...Стоит $150, но уже реально стоящая вещь (как например у Вольво). Ссылку пока кинуть не могу, так что пока только в личку
Изображения
Тип файла: jpg Blis.jpg (81.6 Кб, 125 просмотров)
Тип файла: jpg Blis2.jpg (43.3 Кб, 118 просмотров)
Тип файла: jpg Blis3.jpg (85.2 Кб, 116 просмотров)
Тип файла: jpg Blis4.jpg (50.0 Кб, 112 просмотров)
roper вне форума   Вверх Ответить с цитированием