Форум Fluence-Club.ru|Форум Megane-3

Форум Fluence-Club.ru|Форум Megane-3 (http://fluence-club.ru/forum/index.php)
-   Электрика (http://fluence-club.ru/forum/forumdisplay.php?f=37)
-   -   Система контроля давления шин (http://fluence-club.ru/forum/showthread.php?t=2875)

Natali_K 10.06.2014 19:01

xmax, ну если есть свободные руки то ставится (у меня машина тоже 2013 года только меган). Клип покупала в алиэкспресс, а программы репрога здесь уже выкладывали, для меня подошел и репрог 126. а лучше всего прочтите сообщение №327 на стр 33 и пройдите по ссылке.

кстати по более низкой цене я датчика покупала у hdd71 (Игоря), цены ниже чем у оффициалов и экзисте.

maydayanthem 13.07.2014 02:19

Вложений: 1
Цитата:

Сообщение от Natali_K (Сообщение 470645)
xmax, ну если есть свободные руки то ставится...

first, sorry for english, but i´m not from russia, despite of it i hope, someone will be so kind to help me or give me some new information... you can write russian, it is no problem for me, i´m able to read it, but writting is little bit hard for me... thanx a lot

so, my megane 3 (2009) is only keyless, not hands free
i activated SMTP, of course i can´t see wheels and real values of pressure on display, there is only car without wheels and it is written - sensor absent
but there is another important thing, can someone explain this situation:
if the pressure in the wheel is under normal value there is suddenly an information on the display - if the damaged wheel is front left, then on the display is front left wheel black, on the right display there is a message "Puncture"... all this information are visible within 5-10 second after the wheel has lower pressure.. and this is not all, in the CLIP i can see the exact value of the tire, BUT !!! the value is visible only if the front wheels are between 0 - 1,6 bar and rear wheel 0 - 1,3 bar, normally it is shown 3,5 bar on the display

i cant understand it
i suppose, there is one-way communication from sensor to UCH, the information is displayed only if there is a problem with wheel, but why it is not shown for the whole time, or why the values are not shown 1,4 (1,7) bar and higher...

thank you for your all ideas

some photos in attachment

Кудрявый 13.07.2014 07:53

maydayanthem, такое меню у вас на БК появилось?
http://photo.qip.ru/photo/aia45/2008.../214784739.jpg

Скорее всего проблема в том, что без свободных рук, не хватает антенн в машине, и ЦЭКБС не может определить диагонали авто. Поэтому и начинает путать датчики.

maydayanthem 13.07.2014 15:17

Вложений: 2
Цитата:

Сообщение от Кудрявый (Сообщение 474609)
maydayanthem, такое меню у вас на БК появилось?

MENU on the right is not visible - there is only:
- sensor absent or
- car without wheels or
- message - PUNCTURE

MENU in the middle is car without wheels, but if the pressure is e.g. 1,2 bar, then the wheel with lower pressure is visible and is black (you can see it on pictures)

how is it possible, that system knows which wheel, and know it suddenly, even I don´t have antennas in the car ???

in this way "my" system works, but only on 50% - only if there is a problem with decreasing of pressure...

I read here, that one member activated system like me - only with keyless card - but it was working only 1 or 2 weeks... can someone explain, how was it possible (in which way) and without antennas...??

Londo 26.08.2014 20:19

Народ, а кто нибудь пробовал схему с актиацией датчиков на клипе 141? Мастер сказал что на приборке вообще теперь нет пункта про систему контроля давления шин

Синоптик 26.08.2014 20:57

Я себе когда активировал, тоже 3 недели радовался, потом машинка стала как у тебя без колес и реагирует только при критическом снижении давления. Каким то образом это связано с отсутствием антенн в ручках дверей. На наш рынок, а возможно и везде в мире с этого года изменилась система безключевого доступа, теперь с завода антенн в ручках нет никогда, и из списка опций вообще пропала сисьема определения давления в шинах..... Вот такая печальная петрушка.

сильверстоун 26.08.2014 22:18

экономия производителя на потребителях, мать ее...

maydayanthem 27.08.2014 01:58

Цитата:

Сообщение от Синоптик (Сообщение 478849)
На наш рынок, а возможно и везде в мире с этого года изменилась система безключевого доступа, теперь с завода антенн в ручках нет никогда, и из списка опций вообще пропала сисьема определения давления в шинах..... Вот такая печальная петрушка.

starting november 1st 2014 in European Union, every new car sold in EU has to be equipped with tyre pressure monitoring system ... it is the order of EU...

but tell me, your system was really working correctly for 3 weeks? how is it possible? I was not so successful, I even changed configuration in my UCH from keyless to handsfree... :-(

Синоптик 27.08.2014 10:55

Корректно ли работало сказать сложно, возле каждого колесика было давление, потом колесики пропали, машинка стала как у тебя.
Если ты уже пробовал отвязать, удалить, привязать, изменял конфигурацию, то навряд ли они будут работать. Система просто не понимает реальное расположение колес, вот и все.

Str@sh 27.08.2014 11:00

Синоптик, Вы пробывали колёса перекидывать ? какие изменения были или нет ?


Текущее время: 15:50. Часовой пояс GMT +3.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd. Перевод: zCarot
vB.Sponsors